bobbins (9677001015) part number: 9677001015 77 bobbin ground explanation of part numbers: C?digits 1 & 2 = product class C digits 3 & 4 = material grade ? C last digit 8 = coated bobbin bobbins are an economical and well- proven core design for many applications where relatively low but stable inductance values are required. for higher frequency designs, use small bobbins in 43 material. ? for power applications, bobbins in 77 material are specified for a l and dc bias limits. bobbins in figures 2-5 can be supplied with a uniform thermo- set plastic coating which can withstand a minimum breakdown of 500vrms. this coating will change the dimensions a maximum of 0.5 mm (0.020 ). the last digit of the thermo- set plastic coated part is an 8. ?for any bobbin requirement not listed in the catalog, please contact our customer service group for availability and pricing.? weight: 6.7 (g) chart legend a l ?: ?inductance factor ? ,?? nl?:?value of dc ampere- turns,??? a w :winding area, n/ awg?:?number of turns/ wire size for test coil electrical properties a l (nh) 39 10% a l min. @ nl (at) 33 - 125 n/ awg 75/24 a w (cm 2 ) 0.3 bobbins are tested for a l value at 1khz < 10 gauss. fair- rite products corp.?? ? ??one commercial row, wallkill, new york 12589-0288 888-324-7748 ?? ? ?? 845-895-2055 ?? ? ?? fax: 845-895-2629 ?? ? ?? ferrites@fair- rite.com ?? ? ??www.fair- rite.com dim mm mm tol nominal inch inch misc. a 9.55 -0.15 0.373 _ b 19 0.70 0.75 _ d 12.7 0.15 0.5 _ f 4.65 +0.20 0.187 _ g 1 +0.25 0.045 _ h 1.03 +0.10 0.043 _
|